LOCATIONSWIRE PULLING GRIPS FOR SALE
Custom Truck One Source provides wire grips for industries like oil and gas, electricity, rail, forestry, and construction. With dozens of locations across North America, we can deliver wire grips to your facility or job site. Browse our selection to find the wire grips your fleet needs, then request a quote to start your order.
Types of Wire Pulling Grips
Cable grips increase the pulling force your crew can apply to a cable or rope. Custom Truck One Source offers numerous types of wire-pulling grips that connect to the cable or rope in unique ways.
Chicago Grips
Chicago grips offer the durability you need when working with aluminum, copper, and aluminum conductor steel-reinforced (ACSR) cables — common types in communications, power, and construction applications. Locking loop handles make the grips easy to open as you position them on the wire.
Parallel Grips
Parallel grips are lightweight and compact, resulting in a versatile solution for wires of numerous types and sizes. A large opening allows parallel grips to connect with various types of hooks, winches, and tackle blocks.
Haven’s Grips
A Haven’s grip is a light, compact grip that prioritizes strength over maintaining the conductor’s structure. Haven’s grips reduce stress by allocating pressure to ¼ inch of the cable. Use a Haven’s grip for the strongest steel wires.
Wire Mesh Grips
Wire mesh grips pull overhead and underground cables when installing communication lines or electrical conduit. These grips consist of metal cut into a mesh form that distributes weight over a large area when pulling wires. Reducing strain on the mesh allows these grips to pull coated wires without damaging them.
Type of Jaw Contours for Wire Grips
Cable grips come in different jaw contours. The jaw contour describes how the grip clings to the cable. A jaw may be round and smooth or angular and jagged — the more teeth a jaw features, the stronger its grip. However, teeth may damage the outside of the cable, so you should choose a contour according to the type of cable you plan to pull. We offer four contour options for wire grips:
- Single v: Three-point jaws for small-diameter wire and cables.
- Double v: Four-point jaws for high-strength wires and cables.
- Round: Toothless jaws that are gentle on bare wires.
- Aggressive: Numerous points for times when preventing conductor deformation is a low priority.
Why Custom Truck One Source?
Custom Truck One Source offers the selection and convenience your fleet needs when purchasing cable grips. You can browse our online inventory to find a wide selection of these products. Our support team is available around the clock to help you understand your options and choose the best wire grip for your application.
When you place your order, we’ll deliver to your site from the closest of our 30-plus locations in North America to ensure you receive your products in a timely manner.
Request a Quote
Custom Truck One Source is your reliable partner for wire grips. Shop with us to fill your trucks with wire grips for all situations. Our dedicated customer service reps are available to help you determine which wire grips will rise to your application’s demand, so contact us online to learn more. Request a quote today to start your order and take advantage of our competitive prices and delivery throughout North America.
- Overhead pulling grip
- Dua-Pull style
- 30,600 lbs. breaking strength
- Dua-Pull Size (Conductor/Rope): .88-1.12"/1"-1.5"
- Stainless Steel hardware
- Reinforced hinge
- Engraved bore size
- Bore Size - .250” - 2.500”
- Working loads from 5,000 - 20,000 lbs.
- Stainless Steel hardware
- Reinforced hinge
- Engraved bore size
- Bore Size - .250” - 2.500”
- Working loads from 5,000 LB to 20,000 LB
- Bulldog Jaw
- For bare and stranded copper, ACSR and aluminum conductor, or EHSC and Messenger Guy Wire
- Standard model
- Spring loaded
- Cable size 0.300" - 0.800"
- Wire rope grip
- Work Load Limit 10,000 lbs.
- Weighs 6.7 lbs.
- For bare and stranded copper or ACSR and aluminum conductor cables
- For EHSC and Messenger Guy Wire
- Hot Line model, 7 lbs.
- Spring loaded
- Notched handle
- Parallel jaw, aggressive teeth
- 12,000 LB limit
- 0.397 to 1130 MCM
- Rated capacity: 12,000 lbs.
- Wire size / Gauge (min.): .70" / .397 MCM
- Wire size / Gauge (max.): 1.25" / 1130 MCM
- Handling eye opening: 1-1/4" x 1-3/4"
- Cable Size 0.700" - 1.250"
- Type Wire Rope Grip
- Work Load Limit 12,000 lbs.
- Weighs 8.3 lbs.
- For bare and stranded copper or ACSR and aluminum conductor cables
- Rated Capacity (lbs.): 20,000
- For bare and stranded copper or ACSR and aluminum conductor cables
- Standard model, weighs 21 lbs.
- Spring loaded, un-notched handle
- Type Wire: Rope Grip
- Cable Size: 0.700" - 1.250"
- Work Load Limit: 20,000 lbs.
- For bare and stranded copper or ACSR and aluminum conductor cables
- Hot Line model
- Wire size: 1.24"-1.8"
- Wire gauge: 1130MCM - 2312MCM
- Jaw Type: Parallel
- For bare and stranded copper or ACSR and aluminum conductor cables
- Hot Line model. weighs 3.7 lbs.
- Notched handle
- Parallel jaw, fine teeth
- Cable Size 0.180" - 0.600"
- For bare and stranded copper or ACSR and aluminum conductor cables
- Standard model
- Un-notched handle
- Parallel jaw, fine teeth
- Rated Capacity: 5,000 lbs.
- High-strength steel
- For hardline ranging from .315 to 1.260"
- Double V Jaw Contour
- Tungsten Carbide
- Locking loop handles
- Sawtooth jaw profile resists build-up from galvanized coating
- 5'' jaw length increases surface area contact w/ cable
- For cable sizes 0.218" to 0.55"
- Drop-forged, heat-treated steel w/ a spring latch
- Pulls #8 to #6 AWG bare copper wire
- Single ''V'' groove jaw
- 4500 lbs. Max. Safe Load
- Locking loop handles for easy placement on wire or cable
- Made in U.S.A.
- Similar to Bell-System type ''B'' strand puller
- Pulls 1/4" figure-8 telephone cable
- 0.20" to 0.37" cable dia.range
- Max safe load of 5,000 lbs.
- Serpentine grooves grip insulation on strand
- For bare ACSR, aluminum, and stranded-copper cables
- Less likely to damage conductors
- Helps reduce slippage to make pulling cables easier
- Pulls #8 to #6 AWG bare copper wire
- Single ''V'' groove jaw
- 4.500 lbs. Max. Safe Load
- Locking loop handles for easy placement on wire or cable
- Ideal for bare ACSR, aluminum, and stranded-copper cables
- Smooth jaws ess likely to damage conductors
- Heat-treated steel for excellent durability
- Ideal for bare ACSR, aluminum, and stranded-copper cables
- Smooth jaws less likely to damage conductors
- Helps reduce slippage to make pulling cables easier
- Ideal for bare ACSR, aluminum, and stranded-copper
- Smooth jaws less likely to damage conductors
- Helps reduce slippage to make pulling cables easier
- Used for EHS, Messenger, Guy Strand cables
- For 0.75 to 1" dia. cable sizes w/ 15,000 lbs. max load
- Double ''V'' grooves reduce chance of slippage
- Round jaws are shaped to provide maximum contact with the cable, virtually eliminating conductor damage
- These grips are special order only, please allow 30 days for delivery, not returnable
- Orders must specify exact outside diameter of cables, circular mills with strand combination, or manufacturer's code
